What is GPRS?

01-fuel-gprs-structure-General packet radio service -2g-3g technology-point to point services-p2p service

General packet radio service (GPRS) a standard for wireless communications in which a packet oriented mobile data service is available to users of the 2G ,GSM and 3G technology.

GPRS data transfer is typically charged per megabyte of traffic transferred, while data communication via traditional circuit switching is billed per minute of connection time, independent of whether the user actually is using the capacity or is in an idle state.
GPRS, which supports a wide range of bandwidths, is an efficient use of limited bandwidth and is particularly suited for sending and receiving small bursts of data, such as e-mail and Web browsing, as well as large volumes of data.

Services offered
a) Always online
b) Multimedia messaging service (MMS)
c) Push to talk over cellular (PoC/PTT)
d) Internet applications for smart devices through wireless application protocol (WAP)
e) Point-to-point (P2P) service.

What is the Difference Between GSM and CDMA?

01-gsm-global system for mobile communications

GSM is an acronym for ‘Groupe Special Mobile’, which has now been changed to ‘Global System for Mobile Communication’. CDMA refers to ‘Code Division Multiple Access’. The working of GSM and CDMA is very different.

How GSM works.

GSM is a ‘cellular’ technology, that is, the entire coverage area is divided into various hexagonal shaped cells. Every cell has a corresponding network tower, which serves the mobile phones in that cellular area.
That is the entire frequency band is divided into chunks and each such chunk is divided into timeslots and each such portion is made available to a user.

01-cdma-Code Division Multiple Access-Signal System

How CDMA works.

In CDMA there are many devices which use the same spread spectrum (hence multiple access). There is one physical channel, and a special code for every device in the coverage network. Using this code, the signal of the device is multiplexed, and the same physical channel is used to send the signal (the codes may or may not change).
That is in simple terms the entire frequency band is available to the user. So, in order to differentiate, the transmission from each user is “spread” or coded using an unique code given to individual user. At the receiving end, the spread
information is decoded.

For comparison, imagine a cocktail party, where couples are talking to each other in a single room. The room represents the available bandwidth. In GSM, a speaker takes turns talking to a listener. The speaker talks for a short time and then stops to let another pair talk. There is never more than one speaker talking in the room, no one has to worry about two conversations mixing. In CDMA, any speaker can talk at any time; however each uses a different language. Each listener can only understand the language of their partner. As more and more couples talk, the background noise gets louder, but because of the difference in languages, conversations do not mix.